Navbar Tooltip shows no sensor readings

[Ajimaru]

I have three Tasmota devices configured:
192.168.1.102 is only a relay , SetOption26 1 set and index is 1
192.168.1.144 is a relay and power monitor , SetOption26 1 set and index is 1
192.168.1.148 has no relay but two sensors, MQ-2 and DHT11 , SetOption26 0 set and no index

192.168.1.102 & 192.168.1.144 are green in the navbar. 192.168.1.148 is grey with a question mark.

The odd thing is that values from 192.168.1.144 & 192.168.1.148 are displayed in the Tasmota tab but only updated when I refresh the webpage.

Octoprint and Tasmota debug Logfiles are attached.

octoprint-logs.zip

[jneilliii]

You need to enable polling for updates to automatically be pulled from the devices.

[Ajimaru]

I have set polling to 1min

But the graph is only updated when I refresh the browser window:

octoprint-logs.zip

[jneilliii]

Ah, I never made the plugin do live updates like the temp tab does. Can look into adding that functionality, otherwise I think switching tabs within OctoPrint might also update the graph, or changing the end time and pressing update.

[Ajimaru]

Ah, I never made the plugin do live updates like the temp tab does. Can look into adding that functionality, otherwise I think switching tabs within OctoPrint might also update the graph, or changing the end time and pressing update.

I was not aware that the graph is not live updating, thanks for clearifcation.

The icon tooltiop is showing values, but its always gray with a questionmark, and every 60 second an error message appears.

This Tasmota device (192.168.1.148) has no relay, I have configured it with relay and without relay, the behaviour in regards to the icon color and the error message does not change.

[2025-03-13 18:58:06,293] DEBUG: Checking status of 192.168.1.148 index .
[2025-03-13 18:58:06,300] DEBUG: {'autoConnect': False, 'autoConnectDelay': 10, 'autoDisconnect': False, 'autoDisconnectDelay': 0, 'automaticShutdownEnabled': False, 'backlog_off_delay': 0, 'backlog_on_delay': 0, 'brightness': 50, 'currentState': 'unknown', 'displayWarning': False, 'event_on_connecting': False, 'event_on_disconnect': False, 'event_on_error': False, 'event_on_upload': False, 'gcodeEnabled': False, 'gcodeOffDelay': 0, 'gcodeOnDelay': 0, 'icon': 'fas fa-temperature-low', 'idx': '', 'ip': '192.168.1.148', 'is_led': False, 'is_sensor_only': True, 'label': 'PrinterMonitoring', 'label_extended': '', 'off_color': '#FF0000', 'on_color': '#00FF00', 'password': 'Nirtak19!', 'sensor_identifier': 'DHT11', 'sysCmdOff': False, 'sysCmdOffDelay': 0, 'sysCmdOn': False, 'sysCmdOnDelay': 0, 'sysRunCmdOff': '', 'sysRunCmdOn': '', 'thermal_runaway': False, 'unknown_color': '#808080', 'use_backlog': False, 'username': 'admin', 'warnPrinting': False}
[2025-03-13 18:58:06,533] DEBUG: check status code: 200
[2025-03-13 18:58:06,534] DEBUG: check status text: {"Status":{"Module":18,"DeviceName":"Tasmota-3DDrucker-Rauchmelder","FriendlyName":["Tasmota-3DDrucker-Rauchmelder"],"Topic":"Tasmota-3DDrucker-Rauchmelder","ButtonTopic":"0","Power":"0","PowerLock":"0","PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0,"StatusRetain":0},"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://ota.tasmota.com/tasmota/release/tasmota-sensors.bin.gz","RestartReason":"External System","Uptime":"0T00:32:58","StartupUTC":"2025-03-13T17:25:08","Sleep":50,"CfgHolder":4617,"BootCount":84,"BCResetTime":"2024-02-05T20:03:10","SaveCount":118,"SaveAddress":"F9000"},"StatusFWR":{"Version":"14.5.0(release-sensors)","BuildDateTime":"2025-02-18T14:34:08","Boot":31,"Core":"2_7_8","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8266EX","CR":"511/699"},"StatusLOG":{"SerialLog":0,"WebLog":2,"MqttLog":2,"SysLog":2,"LogHost":"192.168.1.12","LogPort":514,"SSId":["BlackBox",""],"TelePeriod":60,"Resolution":"558180C0","SetOption":["00008009","2805C80001000600003C5A0A192800000000","00000080","00006000","00004000","00000000"]},"StatusMEM":{"ProgramSize":720,"Free":280,"Heap":15,"ProgramFlashSize":1024,"FlashSize":4096,"FlashChipId":"1640E0","FlashFrequency":40,"FlashMode":"DOUT","Features":["0809","8F9A8787","0415A005","B7F7BFCF","05DA9BC4","64367CC7","00084052","20000000","54000020","0008C081","00000000"],"Drivers":"1,2,!3,!4,!5,!6,7,!8,9,10,12,!14,!16,!17,!20,!21,!24,29,!34,62,!65,!66,!68","Sensors":"1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,17,18,19,20,21,22,26,31,34,37,39,40,42,43,45,51,52,55,56,58,59,62,64,66,67,74,98,103,105","I2CDriver":"7,8,9,10,11,12,13,14,15,17,18,20,24,29,31,36,41,42,44,46,48,69,76,89"},"StatusNET":{"Hostname":"Tasmota-3DDrucker-Rauchmelder","IPAddress":"192.168.1.148","Gateway":"192.168.1.1","Subnetmask":"255.255.255.0","DNSServer1":"192.168.1.1","DNSServer2":"0.0.0.0","Mac":"5C:CF:7F:F6:B2:99","Webserver":2,"HTTP_API":1,"WifiConfig":4,"WifiPower":17.0},"StatusMQT":{"MqttHost":"192.168.1.12","MqttPort":1886,"MqttClientMask":"Tasmota-3DDrucker-Rauchmelder","MqttClient":"Tasmota-3DDrucker-Rauchmelder","MqttUser":"sonoff","MqttCount":1,"MqttTLS":0,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4},"StatusTIM":{"UTC":"2025-03-13T17:58:06Z","Local":"2025-03-13T18:58:06","StartDST":"2025-03-30T02:00:00","EndDST":"2025-10-26T03:00:00","Timezone":"+01:00","Sunrise":"07:07","Sunset":"18:51"},"StatusSNS":{"Time":"2025-03-13T18:58:06","ANALOG":{"MQ2_0":2.49},"DHT11":{"Temperature":23.1,"Humidity":38.0,"DewPoint":8.0},"TempUnit":"C"},"StatusSTS":{"Time":"2025-03-13T18:58:06","Uptime":"0T00:32:58","UptimeSec":1978,"Heap":15,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Wifi":{"AP":1,"SSId":"BlackBox","BSSId":"04:B4:FE:BD:BD:59","Channel":1,"Mode":"11n","RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:04"}}}
[2025-03-13 18:58:06,536] DEBUG: 192.168.1.148 index  response: {'Status': {'Module': 18, 'DeviceName': 'Tasmota-3DDrucker-Rauchmelder', 'FriendlyName': ['Tasmota-3DDrucker-Rauchmelder'], 'Topic': 'Tasmota-3DDrucker-Rauchmelder', 'ButtonTopic': '0', 'Power': '0', 'PowerLock': '0', 'PowerOnState': 3, 'LedState': 1, 'LedMask': 'FFFF', 'SaveData': 1, 'SaveState': 1, 'SwitchTopic': '0', 'SwitchMode': [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0], 'ButtonRetain': 0, 'SwitchRetain': 0, 'SensorRetain': 0, 'PowerRetain': 0, 'InfoRetain': 0, 'StateRetain': 0, 'StatusRetain': 0}, 'StatusPRM': {'Baudrate': 115200, 'SerialConfig': '8N1', 'GroupTopic': 'tasmotas', 'OtaUrl': 'http://ota.tasmota.com/tasmota/release/tasmota-sensors.bin.gz', 'RestartReason': 'External System', 'Uptime': '0T00:32:58', 'StartupUTC': '2025-03-13T17:25:08', 'Sleep': 50, 'CfgHolder': 4617, 'BootCount': 84, 'BCResetTime': '2024-02-05T20:03:10', 'SaveCount': 118, 'SaveAddress': 'F9000'}, 'StatusFWR': {'Version': '14.5.0(release-sensors)', 'BuildDateTime': '2025-02-18T14:34:08', 'Boot': 31, 'Core': '2_7_8', 'SDK': '2.2.2-dev(38a443e)', 'CpuFrequency': 80, 'Hardware': 'ESP8266EX', 'CR': '511/699'}, 'StatusLOG': {'SerialLog': 0, 'WebLog': 2, 'MqttLog': 2, 'SysLog': 2, 'LogHost': '192.168.1.12', 'LogPort': 514, 'SSId': ['BlackBox', ''], 'TelePeriod': 60, 'Resolution': '558180C0', 'SetOption': ['00008009', '2805C80001000600003C5A0A192800000000', '00000080', '00006000', '00004000', '00000000']}, 'StatusMEM': {'ProgramSize': 720, 'Free': 280, 'Heap': 15, 'ProgramFlashSize': 1024, 'FlashSize': 4096, 'FlashChipId': '1640E0', 'FlashFrequency': 40, 'FlashMode': 'DOUT', 'Features': ['0809', '8F9A8787', '0415A005', 'B7F7BFCF', '05DA9BC4', '64367CC7', '00084052', '20000000', '54000020', '0008C081', '00000000'], 'Drivers': '1,2,!3,!4,!5,!6,7,!8,9,10,12,!14,!16,!17,!20,!21,!24,29,!34,62,!65,!66,!68', 'Sensors': '1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,17,18,19,20,21,22,26,31,34,37,39,40,42,43,45,51,52,55,56,58,59,62,64,66,67,74,98,103,105', 'I2CDriver': '7,8,9,10,11,12,13,14,15,17,18,20,24,29,31,36,41,42,44,46,48,69,76,89'}, 'StatusNET': {'Hostname': 'Tasmota-3DDrucker-Rauchmelder', 'IPAddress': '192.168.1.148', 'Gateway': '192.168.1.1', 'Subnetmask': '255.255.255.0', 'DNSServer1': '192.168.1.1', 'DNSServer2': '0.0.0.0', 'Mac': '5C:CF:7F:F6:B2:99', 'Webserver': 2, 'HTTP_API': 1, 'WifiConfig': 4, 'WifiPower': 17.0}, 'StatusMQT': {'MqttHost': '192.168.1.12', 'MqttPort': 1886, 'MqttClientMask': 'Tasmota-3DDrucker-Rauchmelder', 'MqttClient': 'Tasmota-3DDrucker-Rauchmelder', 'MqttUser': 'sonoff', 'MqttCount': 1, 'MqttTLS': 0, 'MAX_PACKET_SIZE': 1200, 'KEEPALIVE': 30, 'SOCKET_TIMEOUT': 4}, 'StatusTIM': {'UTC': '2025-03-13T17:58:06Z', 'Local': '2025-03-13T18:58:06', 'StartDST': '2025-03-30T02:00:00', 'EndDST': '2025-10-26T03:00:00', 'Timezone': '+01:00', 'Sunrise': '07:07', 'Sunset': '18:51'}, 'StatusSNS': {'Time': '2025-03-13T18:58:06', 'ANALOG': {'MQ2_0': 2.49}, 'DHT11': {'Temperature': 23.1, 'Humidity': 38.0, 'DewPoint': 8.0}, 'TempUnit': 'C'}, 'StatusSTS': {'Time': '2025-03-13T18:58:06', 'Uptime': '0T00:32:58', 'UptimeSec': 1978, 'Heap': 15, 'SleepMode': 'Dynamic', 'Sleep': 50, 'LoadAvg': 19, 'MqttCount': 1, 'Wifi': {'AP': 1, 'SSId': 'BlackBox', 'BSSId': '04:B4:FE:BD:BD:59', 'Channel': 1, 'Mode': '11n', 'RSSI': 86, 'Signal': -57, 'LinkCount': 1, 'Downtime': '0T00:00:04'}}}
[2025-03-13 18:58:06,537] DEBUG: Sensor Data: {'Temperature': 23.1, 'Humidity': 38.0, 'DewPoint': 8.0}
[2025-03-13 18:58:06,552] DEBUG: 192.168.1.148 index  is UNKNOWN
[2025-03-13 18:58:06,553] DEBUG: {'Status': {'Module': 18, 'DeviceName': 'Tasmota-3DDrucker-Rauchmelder', 'FriendlyName': ['Tasmota-3DDrucker-Rauchmelder'], 'Topic': 'Tasmota-3DDrucker-Rauchmelder', 'ButtonTopic': '0', 'Power': '0', 'PowerLock': '0', 'PowerOnState': 3, 'LedState': 1, 'LedMask': 'FFFF', 'SaveData': 1, 'SaveState': 1, 'SwitchTopic': '0', 'SwitchMode': [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0], 'ButtonRetain': 0, 'SwitchRetain': 0, 'SensorRetain': 0, 'PowerRetain': 0, 'InfoRetain': 0, 'StateRetain': 0, 'StatusRetain': 0}, 'StatusPRM': {'Baudrate': 115200, 'SerialConfig': '8N1', 'GroupTopic': 'tasmotas', 'OtaUrl': 'http://ota.tasmota.com/tasmota/release/tasmota-sensors.bin.gz', 'RestartReason': 'External System', 'Uptime': '0T00:32:58', 'StartupUTC': '2025-03-13T17:25:08', 'Sleep': 50, 'CfgHolder': 4617, 'BootCount': 84, 'BCResetTime': '2024-02-05T20:03:10', 'SaveCount': 118, 'SaveAddress': 'F9000'}, 'StatusFWR': {'Version': '14.5.0(release-sensors)', 'BuildDateTime': '2025-02-18T14:34:08', 'Boot': 31, 'Core': '2_7_8', 'SDK': '2.2.2-dev(38a443e)', 'CpuFrequency': 80, 'Hardware': 'ESP8266EX', 'CR': '511/699'}, 'StatusLOG': {'SerialLog': 0, 'WebLog': 2, 'MqttLog': 2, 'SysLog': 2, 'LogHost': '192.168.1.12', 'LogPort': 514, 'SSId': ['BlackBox', ''], 'TelePeriod': 60, 'Resolution': '558180C0', 'SetOption': ['00008009', '2805C80001000600003C5A0A192800000000', '00000080', '00006000', '00004000', '00000000']}, 'StatusMEM': {'ProgramSize': 720, 'Free': 280, 'Heap': 15, 'ProgramFlashSize': 1024, 'FlashSize': 4096, 'FlashChipId': '1640E0', 'FlashFrequency': 40, 'FlashMode': 'DOUT', 'Features': ['0809', '8F9A8787', '0415A005', 'B7F7BFCF', '05DA9BC4', '64367CC7', '00084052', '20000000', '54000020', '0008C081', '00000000'], 'Drivers': '1,2,!3,!4,!5,!6,7,!8,9,10,12,!14,!16,!17,!20,!21,!24,29,!34,62,!65,!66,!68', 'Sensors': '1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,17,18,19,20,21,22,26,31,34,37,39,40,42,43,45,51,52,55,56,58,59,62,64,66,67,74,98,103,105', 'I2CDriver': '7,8,9,10,11,12,13,14,15,17,18,20,24,29,31,36,41,42,44,46,48,69,76,89'}, 'StatusNET': {'Hostname': 'Tasmota-3DDrucker-Rauchmelder', 'IPAddress': '192.168.1.148', 'Gateway': '192.168.1.1', 'Subnetmask': '255.255.255.0', 'DNSServer1': '192.168.1.1', 'DNSServer2': '0.0.0.0', 'Mac': '5C:CF:7F:F6:B2:99', 'Webserver': 2, 'HTTP_API': 1, 'WifiConfig': 4, 'WifiPower': 17.0}, 'StatusMQT': {'MqttHost': '192.168.1.12', 'MqttPort': 1886, 'MqttClientMask': 'Tasmota-3DDrucker-Rauchmelder', 'MqttClient': 'Tasmota-3DDrucker-Rauchmelder', 'MqttUser': 'sonoff', 'MqttCount': 1, 'MqttTLS': 0, 'MAX_PACKET_SIZE': 1200, 'KEEPALIVE': 30, 'SOCKET_TIMEOUT': 4}, 'StatusTIM': {'UTC': '2025-03-13T17:58:06Z', 'Local': '2025-03-13T18:58:06', 'StartDST': '2025-03-30T02:00:00', 'EndDST': '2025-10-26T03:00:00', 'Timezone': '+01:00', 'Sunrise': '07:07', 'Sunset': '18:51'}, 'StatusSNS': {'Time': '2025-03-13T18:58:06', 'ANALOG': {'MQ2_0': 2.49}, 'DHT11': {'Temperature': 23.1, 'Humidity': 38.0, 'DewPoint': 8.0}, 'TempUnit': 'C'}, 'StatusSTS': {'Time': '2025-03-13T18:58:06', 'Uptime': '0T00:32:58', 'UptimeSec': 1978, 'Heap': 15, 'SleepMode': 'Dynamic', 'Sleep': 50, 'LoadAvg': 19, 'MqttCount': 1, 'Wifi': {'AP': 1, 'SSId': 'BlackBox', 'BSSId': '04:B4:FE:BD:BD:59', 'Channel': 1, 'Mode': '11n', 'RSSI': 86, 'Signal': -57, 'LinkCount': 1, 'Downtime': '0T00:00:04'}}}
[2025-03-13 18:59:06,565] DEBUG: Checking status of 192.168.1.102 index 1.
[2025-03-13 18:59:06,579] DEBUG: {'autoConnect': False, 'autoConnectDelay': 10, 'autoDisconnect': False, 'autoDisconnectDelay': 0, 'automaticShutdownEnabled': False, 'backlog_off_delay': 0, 'backlog_on_delay': 0, 'brightness': 50, 'currentState': 'unknown', 'displayWarning': True, 'event_on_connecting': False, 'event_on_disconnect': False, 'event_on_error': False, 'event_on_upload': False, 'gcodeEnabled': False, 'gcodeOffDelay': 0, 'gcodeOnDelay': 0, 'icon': 'fas fa-bolt', 'idx': '1', 'ip': '192.168.1.102', 'is_led': False, 'is_sensor_only': False, 'label': 'MainPower', 'label_extended': '', 'off_color': '#FF0000', 'on_color': '#00FF00', 'password': 'Nirtak19!', 'sensor_identifier': '', 'sysCmdOff': False, 'sysCmdOffDelay': 0, 'sysCmdOn': False, 'sysCmdOnDelay': 0, 'sysRunCmdOff': '', 'sysRunCmdOn': '', 'thermal_runaway': False, 'unknown_color': '#808080', 'use_backlog': False, 'username': 'admin', 'warnPrinting': True}
[2025-03-13 18:59:07,152] DEBUG: check status code: 200

plugin_tasmota_debug(1).log

[jneilliii]

192.168.1.148 index is UNKNOWN

looks like it's getting confused from an undefined index since there is no relay associated.

The icon tooltiop is showing values, but its always gray with a questionmark, and every 60 second an error message appears.

If you enable the hide option on the sensor only device does it still give the error?

I think it will completely make the icon go away, and the data will only be visible from the graph tab.

[Ajimaru]

192.168.1.148 index is UNKNOWN

looks like it's getting confused from an undefined index since there is no relay associated.

The icon tooltiop is showing values, but its always gray with a questionmark, and every 60 second an error message appears.

If you enable the hide option on the sensor only device does it still give the error?

I think it will completely make the icon go away, and the data will only be visible from the graph tab.

Yes the error persits, regardless wheter an Index is configured or not and Hide is enabled or disabled.
But sensors reading are displayed in the mousover.

[Ajimaru]

I have created a relay on this Tasmota Device as a work around, the Temperature Icon is now green and no more error messages are shown anymore.