You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
General refactor of Hardware Specifications, Serial and heading - ZTE, ZIZA, Zyxel (#116)
* General refactor of Hardware Specifications, Serial and heading - Ziza, Zyxel, ZTE
* Fix ODM
Co-authored-by: Simone Bortolin <simonebortolin@users.noreply.github.com>
| Web Gui | ✅ username `admin` or `guest`, password `1234` or `guest`|
26
+
| SSH | ✅ username `admin`, password `admin`|
27
+
| Telnet ||
28
+
| Serial | ✅ |
29
+
| Serial baud | 115200 |
30
+
| Serial encoding | 8-N-1 |
31
+
| Form Factor | miniONT SFP |
26
32
27
33
{% include image.html file="op151s.png" alt="Ziza OP151S" caption="Ziza OP151S" %}
34
+
{% include image.html file="tw236h-cdel-th.jpg" alt="PMG3000-D20B Teardown" caption="PMG3000-D20B Teardown" %}
35
+
{% include image.html file="tw236h-cdel-th-back.jpg" alt="PMG3000-D20B Teardown" caption="PMG3000-D20B Teardown" %}
36
+
37
+
## Serial
38
+
39
+
The stick has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be accessed from the top surface. It's near the SFP header. TX, RX and ground pads need to be connected to a USB2TTL adapter supporting a logic level of 3.3V.
40
+
41
+
{% include image.html file="tw236h-cdel-serial.jpg" alt="PMG3000-D20B Serial Pinout" caption="PMG3000-D20B Serial Pinout" %}
42
+
43
+
{% include alert.html content="Some USB TTL adapters label TX and RX pins the other way around: try to swap them if the connection doesn't work." alert="Note" icon="svg-warning" color="yellow" %}
28
44
29
45
## Firmware is interchangeable with:
30
46
@@ -35,5 +51,4 @@ parent: Ziza
35
51
36
52
# Miscellaneous Links
37
53
38
-
-[Tech Info Depot Wiki](http://en.techinfodepot.shoutwiki.com/wiki/ZISA_OP151S)
39
-
54
+
-[Tech Info Depot Wiki](http://en.techinfodepot.shoutwiki.com/wiki/ZISA_OP151S)
{% include image.html file="f6005_of.jpg" alt="F6005 Open Fiber" caption="F6005 with Open Fiber branding <ahref='https://forum.fibra.click/u/mirko991'>@mirko991</a>" %}
28
30
{% include image.html file="f6005_tim.jpg" alt="F6005 TIM" caption="F6005 with ZTE branding, like the ones used by TIM" %}
@@ -33,9 +35,6 @@ parent: ZTE
33
35
- V6.0.10N14
34
36
- V6.0.10P2N02
35
37
36
-
## List of partitions
37
-
## List of firmwares and files
38
-
39
38
# Use
40
39
41
40
## Enable password
@@ -46,8 +45,4 @@ You can use this tool to generate the enable password:
46
45
47
46
# Known Bugs
48
47
49
-
Buffer size is suboptimal: because of this the ONT is unable to work at full speed during uploads if the server is geographically, and/or latency-wise, far. There are no known problems if there is only one person in the GPON tree.
50
-
51
-
# Miscellaneous Links
52
-
53
-
48
+
Buffer size is suboptimal: because of this the ONT is unable to work at full speed during uploads if the server is geographically, and/or latency-wise, far. There are no known problems if there is only one person in the GPON tree.
| IP address | 192.168.1.1 | 192.168.1.1 | 192.168.1.1 ||
25
+
| Web Gui | ✅ user `admin`, password `admin` or user `user`, password `user`| ✅ user `admin`, password `admin` or user `user`, password `user`|||
26
+
| SSH |||||
27
+
| Telnet |||||
28
+
| Serial |||||
29
+
| Form Factor | ONT | ONT |||
26
30
27
31
{% include image.html file="f601_v6_1.jpg" alt="F601 v6" caption="F601 v6" %}
28
32
{% include image.html file="f601_v7.jpg" alt="F601 v7" caption="A wall made out of broken F601 v7s" %}
@@ -40,9 +44,6 @@ parent: ZTE
40
44
### HW V9.0
41
45
- V9.0.10P2N1
42
46
43
-
## List of partitions
44
-
## List of firmwares and files
45
-
# Known Bugs
46
47
# Random notes
47
48
- the F601v7 is mounted 'upside down' to save on waveguides, the LEDs would be on the bottom of the PCB, so it would have to be turned upside down to make it cooler...
48
49
- the F601v6 turns on and runs even with 9 V input
{% include image.html file="f601v9/front.jpg" alt="Front of the F601 v9" caption="Bottom of the F601 v6 <ahref='https://forum.fibra.click/u/mirko991'>@mirko991</a>" %}
77
-
{% include image.html file="f601v9/back.jpg" alt="Bottom of the F601 v9" caption="Bottom of the F601 v6 <ahref='https://forum.fibra.click/u/mirko991'>@mirko991</a>" %}
78
-
{% include image.html file="f601v9/teardown-1.jpg" alt="Teardown of the F601 v7" caption="Teardown of the F601 v9 <ahref='https://forum.fibra.click/u/mirko991'>@mirko991</a>" %}
79
-
{% include image.html file="f601v9/teardown-2.jpg" alt="Teardown of the F601 v7" caption="Teardown of the F601 v9 <ahref='https://forum.fibra.click/u/mirko991'>@mirko991</a>" %}
80
-
{% include image.html file="f601v9/teardown-3.jpg" alt="Teardown of the F601 v7" caption="Teardown of the F601 v9 <ahref='https://forum.fibra.click/u/mirko991'>@mirko991</a>" %}
81
-
82
-
83
-
84
-
# Miscellaneous Links
85
-
86
-
-[Usource GPON ONU STICK](https://www.usourcetech.com/web/userfiles/download/GPONSTICKSFPCLASSB-2B_Rev01.pdf)
{% include image.html file="f601v9/front.jpg" alt="Front of the F601 v9" caption="Bottom of the F601 v9 <ahref='https://forum.fibra.click/u/mirko991'>@mirko991</a>" %}
79
+
{% include image.html file="f601v9/back.jpg" alt="Bottom of the F601 v9" caption="Bottom of the F601 v9 <ahref='https://forum.fibra.click/u/mirko991'>@mirko991</a>" %}
80
+
{% include image.html file="f601v9/teardown-1.jpg" alt="Teardown of the F601 v9" caption="Teardown of the F601 v9 <ahref='https://forum.fibra.click/u/mirko991'>@mirko991</a>" %}
81
+
{% include image.html file="f601v9/teardown-2.jpg" alt="Teardown of the F601 v9" caption="Teardown of the F601 v9 <ahref='https://forum.fibra.click/u/mirko991'>@mirko991</a>" %}
82
+
{% include image.html file="f601v9/teardown-3.jpg" alt="Teardown of the F601 v9" caption="Teardown of the F601 v9 <ahref='https://forum.fibra.click/u/mirko991'>@mirko991</a>" %}
0 commit comments