Skip to content

BOUNCING_PILLOW_FIELDS.md

Latest commit

 

History

History
130 lines (99 loc) · 4.61 KB

BOUNCING_PILLOW_FIELDS.md

File metadata and controls

130 lines (99 loc) · 4.61 KB

Bouncing Pillow Assessment Fields

This document maps each field from the bouncing pillow inspection form to either existing assessments that can be reused or new assessments that need to be created.

Assessment Strategy

Existing Assessments to Reuse

  1. fan_assessments - Covers entire Blower section

New Assessments to Create

  1. bouncing_pillow_inflatable_assessments - Inflatable-specific checks
  2. bouncing_pillow_site_assessments - Site condition checks
  3. bouncing_pillow_impact_assessments - Impact area and safety checks
  4. bouncing_pillow_fencing_assessments - Fencing and containment checks

1. Inflatable Section → bouncing_pillow_inflatable_assessments

Fields to include:

  • security_of_seams_pass (boolean)
  • security_of_seams_comment (text)
  • air_loss_points_pass (boolean)
  • air_loss_points_comment (text) - "No air loss points found when smoke test carried out"
  • foundation_pass (boolean)
  • foundation_comment (text) - "Sand", "Depth of sand was 11cm at lowest point"
  • gradient_average (decimal) - "12.6 degrees"
  • gradient_average_pass (boolean)
  • gradient_average_comment (text) - "10 +13+15 = 38 38/3= 12.6"
  • fabric_fr_pass (boolean)
  • fabric_fr_comment (text)
  • fabric_strength_pass (boolean)
  • fabric_strength_comment (text)
  • internal_pressure (decimal) - "0.43KPA"
  • internal_pressure_pass (boolean)
  • internal_pressure_comment (text)
  • grounding_pass (boolean)
  • grounding_comment (text)
  • deflation_evacuation_time (integer) - "18 Minuets" [sic]
  • deflation_evacuation_time_pass (boolean)
  • deflation_evacuation_time_comment (text)
  • artwork_pass (boolean)
  • artwork_comment (text) - "Label"
  • identification_pass (boolean)
  • identification_comment (text) - "Marker", "Noted down by manufacture name"

2. Site Section → bouncing_pillow_site_assessments

Fields to include:

  • slope (decimal) - "L 5 degree"
  • slope_pass (boolean)
  • slope_comment (text) - "Less than 5degree of slope"
  • clear_area (decimal) - "2.1m"
  • clear_area_pass (boolean)
  • clear_area_comment (text)
  • headroom_pass (boolean)
  • headroom_comment (text) - "Infinite", "Open top inflatable with no restrictions"

3. Impact Area Section → bouncing_pillow_impact_assessments

Fields to include:

  • hard_objects_pass (boolean)
  • hard_objects_comment (text) - "None"
  • depth_of_impact_attenuation (decimal) - "11cm"
  • depth_of_impact_attenuation_pass (boolean)
  • depth_of_impact_attenuation_comment (text) - "Measured in 14 locations around perimeter"
  • signage_pass (boolean)
  • signage_comment (text) - "Entrance"
  • number_of_users (integer) - "22 Users"
  • number_of_users_pass (boolean)
  • number_of_users_comment (text)

4. Fencing Section → bouncing_pillow_fencing_assessments

Fields to include:

  • distance (decimal) - "2.3m"
  • distance_pass (boolean)
  • distance_comment (text)
  • height (decimal) - "0.9m"
  • height_pass (boolean)
  • height_comment (text)
  • strength_pass (boolean)
  • strength_comment (text)
  • visibility_pass (boolean)
  • visibility_comment (text)
  • entrapment_pass (boolean)
  • entrapment_comment (text)
  • gateways (integer) - "x2"
  • gateways_pass (boolean)
  • gateways_comment (text) - "There are 2 gateways however they are 90cm not 1m - low risk"

5. Blower Section → fan_assessments (REUSE EXISTING)

This section maps perfectly to the existing fan_assessments table:

  • Size & Type → fan_size_type + fan_size_type_pass + fan_size_type_comment ("0.55kw 240v")
  • Identification → blower_serial ("PON02", "Identification found on flap of blower")
  • Inlet/outlet mesh → blower_finger_pass + blower_finger_comment ("Secure")
  • Wiring/cable/plug → blower_visual_pass + blower_visual_comment
  • PAT test → pat_pass + pat_comment + pat_date ("09/07/2025")
  • Casing → blower_visual_pass + blower_visual_comment

Summary

For bouncing pillow inspections, we will:

  1. Reuse the existing fan_assessments table for all blower-related checks
  2. Create four new assessment tables:
    • bouncing_pillow_inflatable_assessments (main inflatable checks + container)
    • bouncing_pillow_site_assessments (site conditions)
    • bouncing_pillow_impact_assessments (impact area safety)
    • bouncing_pillow_fencing_assessments (fencing and barriers)

This approach maintains consistency with the existing assessment structure where each assessment type has its own dedicated table with pass/fail/comment fields for each check.