- AB Drives
- supports pinned bearings/pulleys or screws (pins are 25mm)
- option for adding a top bearing support for stepper motor shafts (uses F695 bearings)
- Fixed all belt path issues with the gantry
- integrated Y endstop/sensorless endstop
- Gave every piece a low poly / stealthy look to them
- Z Joints
- updated KGLM z joints so they are less prone to cracking
- Added Rigid Z joints
- XY Joints
- Stock build now uses Toothed idlers
- supports pinned bearings/pulleys or screws (pins are 25mm)
- option to use Live Idlers
- Front Idlers
- Implemented the BFI idlers for the AB belts
- Modified the BFI idlers from clees repo to fix the belt path for the R1 gantry
- supports pinned bearings or screws (pins are 14mm)
- Rear Gantry Changes
- Swapped rear extrusion and Z chain to give more room for toolhead board wiring/umbilical
- Removed support for the printed Z chain
- Z-Chain guide now has chamber thermistor mount
- New klicky probe dock that keys into the B drive
- X Carriage
- No changes to the X carriage
- New probe mounts, now supports the following probes also includes a printed sensorless endstop bumper for X
- Beacon/Cartographer
- Klicky
- KlickyPCB
- BIQU Microprobe
- Toolhead
- Anthead is now the stock toolhead
- Z Drives
- Z drives now use 152mm belt loops to keep the entire assembly really compact
- screw driven closed loop belt tensioning
- supports nema14 / 17 (up to 52 mm long motors)
- Option for G2Z Z drives now supported with matching skirts
- Z Idlers
- BZI idlers for the Z belts
- Modified BZI to support both toothed idlers and bearing stacks (there are different parts named accordingly)
- Option for live Idlers Z idlers
- supports pinned bearings or screws (pins are 18mm)
- Door
- New door hinge/ latch system that no longer needs the magnet latch on the inside of the printer
- Door now needs 3mm foam to help seal the enclosure better
- Panel clips
- 2 new panel clip options
- Toolless twist lock panel clip
- screwed on panel clips
- There is a parametric panel clip CAD file so you can get custom sized for your build if needed (stock uses 3mm foam and 3mm panels)
- reverse bowden tube entry now has multiple versions for different types of collets
- ptfe guide attaches via twist lock setup similar to panel clips
- Spool holder is now 2 pieces so it can be stored flat when not needed
- Bottom Panels screw holes have been moved (Bottom panel is not required in the build)
- Z Belt Panel covers have been updated with a new insert to cover the hole to help keep out debris
- Skirts
- All new Skirts to match the new aesthetic
- Rear Skirts
- Rear skirt now includes 2 keystone slots
- Option for filtered power Inlets
- Front Skirt
- Headless option now has all the hexes in the grid are centered correctly (previous version was not)
- Added BTT TFT35 display mount
- Added Waveshare 4.3 and BTT43 mount (same mount for both displays)
- Filter
- New carbon filter added to mount under the bed
- Uses a single 5015 fan for the filter
- Bed heater / air circulation fans
- Dual 5015 bed fans
- Printed part replaces the stock Z belt covers on the front of the printer
- Handles have been updated to be easier to mount , no longer need to be removed to remove top panel
- Added dedicated Pinned version for the front idler carrier
- added dual 5015 bed fan option
- updated filter cartridge and catridge lid to match the new bed fans
- updated CAD assembly to RC3 with all the latest changes
- added missing parts to the CAD assembly caused by a bad export
- fixed issue with bearings rubbing on the A drive
- closed up the Z belt holes in the AB drives and front idlers and made them more symmetrical
- fixed issues #143 , #141, #138 , #137
- Updated CAD to RC1 status
- uploaded WIP manual with updated preloaded nut callouts
- Added G2Z Cad and organized all the STLS (Z drives and skirts) G2Z uses same foot mounts from R1Z and skirt accent pieces
- fixed Pinned XY joints hole sizes to now all be 3.2mm
- Updated latest assembly to include Anthead
- increased tension travel on the front idlers by 5mm (from 3mm to 8mm) , minor changes to the front cover of the idler as well
- fixed incorrect counterbore bridging on the rear bowden entry files (thanks to user named Yell for finding that)
- added CNC gantry top bearing mount
- Updated all the umbilical mounts to accomodate the new top bearing mount, as it was interfearing
- removed the YC8 version of the umbilical
- updated cad assembly to v59
- Added new top bearing support for a double shear bearing on the AB motors
- cleaned up main cad assembly
- posted link to fusion source assembly file to be downloaded
- adjusted gantry files to no longer need built in printed shim, now there are shims on both sides of every bearing stack
- added missing filter files
- fixed naming issues on certain files
- added new under bed carbon filter
- started on CAD assembly clean up
- renamed various files
- cleaned up files
- updated the Hula foot mounts to the latest version that works with the bottom panel
- added new TFT35 display front skirt
- updated latest cad assembly v55
- removed old cad files no longer needed (moved hula cad files into main assembly)
- organized panel clip files
- updated latest cad assembly v54
- added dual color rear bowden entry option
- Updated Z drives for better printability to match new skirt accent pieces
- Added under bed filter from KyleGB to the main repo (still need STLs)
- fixed waveshare accent pieces
- updated latest cad assembly v52
- updated skirts with new accent pieces as well as bottom panel mounting provisions
- Updated z belt cover accent cover to fit better
- added twist lock panel clips for 3mm foam and panels
- fixed printing orientation for rail stops and umbilical mounts
- Updated R1 Skirts to now include accent strips along the bottom as well as allow for a bottom panel to fit
- Updated skirts to they are all the same height , some had about ~1mm difference between them
- Updated the waveshare mount to now us m2 self tapping screws instead of filament to keep bezel on
- Updated Z drive foot mount to accommodate bottom panel
- Update Beacon mount to work with older Rev D beacon probes
- Added a new rear bowden entry set, supporting m10 collet, ECAS collet, or No collet
- Added R1 style stock panel clips (tool less panel clips are coming soon as an option as well)
- Added fixed Z belt covers to better fit with the R1 Z belt location
- Organized the panel file directory
- Added Beacon probe mount
- Added 120x120 build R1 Cad assembly
- Added rear skirts for 120x120 builds
- Organized files into 120 and 180 specific folders
- added rear power inlet skirts
- updated printed rail stops to match the style of R1 update (low poly look)
- added keystone blank model to fill the keystone slots on the rear skirt if not used
- updated Z drive tensioner body to use longer m3x25 instead of m3x20
- added optional Hula feet adapters for R1 and G2Z
- updated latest cad assembly
- uploaded side skirts and 4.3 waveshare display front skirt
- changed hex pattern on Z drives to make them easier to print
- adjust the location of the Z gantry belts pulley to fit in the front idlers better (#124)
- fixed z drive issue with inconsistencies with both A and B z drives (#120)
- updated z tensioner bearing overhang to be easier to print (#122)
- Added ziptie spot on to klicky dock
- Updated Z drives to fit powge and formbot metal 64T pulleys (#115)
- Updated Z idlers to fit toothed pulleys with a flange of 13mm OD (#116)
- raised klicky dock , it was hanging too low (#117)
- updated spool holder to now work with 3mm foam (#118)
- added pushed rigid z joints
- new z belt covers
- new bowden tube holder
- new removable spool holder (modified from LDOs)
- Added Nema14 Z motor mounts
- New beta rev2 Z drives with the 152mm belt loops
- Shrunk entire body by 5mm or so
- rotated the Z drives 180deg, this makes it easier to retention the closed loop belts after they are assembled if needed (thanks @Squirrel-brain)
| Item | Qty | Notes |
|---|---|---|
| GT2-16-Toothed Idler | 6 | XY-Joints and Z idlers now use toothed idlers by default, bearing stacks will still work |
| GT2-152mm closed loop belt | 4 | New Z drives use 152mm belt loops instead of the 188mm |
| screws | IDK | i havent gone through and checked the changes for the hardware as of yet |
| MGN9H | 1 | X rail is now going to be spec as an MGN9H rail instead of MGN9C to support boop natively |
| Klicky_PCB | 1 | now offical support optional as standard klikcy is still supported |
| BIQU_microprobe | 1 | also now an official supported mount for those that want to use it |